22
7
）
Instructions for using the collection bag
1. Please assemble the collection bag according to the steps in the assembly instructions "Assembly Step 4" Collection Bag Assembly" (page 7-8).
2. During the use of the machine, the dust inhaled by the machine may cause the venting holes of the collecting bag to become clogged or cause
the air to return when the collecting bag is full. At this time, please open the exhaust window zipper to make the collection bag ventilate; or check if
the collection bag is full. (See Fig 36-1, 2, 3)
。
Fig.36-2 Open zipper
Fig.36-3
Fig.36-1 Reflux
3.
When the collection bag is full, stop the machine; remove the collection bag and dump
the garbage.
（
see fig 37-1
、
2
、
3
、
4
、
5
、
6
）
Fig.37-1 Fig.37-2 Fig.37-3
Take down the bag interface Remove the collection bag hanging plate Remove the collection bag
Fig.37-4 Fig.37-5 Fig.37-6
Open the collection bag mouth Open the collection bag mouth Pour out the garbage in the
collection bag
4.
Collection bag precautions
●
Note
：
1.
When encountering backflow, please check if the venting hole of the collecting
bag is blocked
；
2.
Whether the collection bag is full
；
3.
Stop the machine and check if the collection bag interface is block
。
●
Note: When loading and unloading the collection bag, please make sure the machine has
been turned off.
●
Note: Before starting the machine,
please check if the collection bag mouth is
closed.
●
Note: It is strictly forbidden to open the
collection bag mouth when the machine is
working.
●
Note: When cleaning the collection bag,
do not tap the collection bag with a tool.
8
）
Stop the engine.
Please understand the individual indications
of the throttle marks in the "Control Marks
(page 5)".
1.
Move the throttle handle to the flameout
position.
（
see fig 38
）
Fig.38 Handle off position
