5.5 CUTTING HEIGHT ADJUSTMENT
Check the cutting height settings, and make any necessary adjustments. Then pull the handle and move it
forward or backward to change the height of cut. There are 5 adjustment heights(20-70mm).
The blade can cause serious injury. Stop the engine before adjusting cutting
height.
5.6 WASHING CONNECTOR
Function: Use for clean the chassis.
Method: Connect the pipe with washing connector, Let the water pass through the pipe and wash the bottom
of chassis.
6. MAINTENANCE
IMPORTANT
Regular, careful maintenance is essential for keeping the safety level and original
performance of the machine unchanged in time.
Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition. Regular
maintenance is essential for safety and performance.
Never store the equipment with fuel in the tank inside a building where vapour may reach a flame or a
spark or a source of extreme heat.
Allow the engine to cool before storing in an enclosed space.
To reduce the fire hazard, keep the engine, exhaust silencer, battery compartment and fuel storage area
free of grass, leaves, or excessive grease. Do not leave containers with grass cuttings in rooms.
For reasons of safety, do not use the equipment with worn or damaged parts. Parts are to be replaced
17
