12
control lever positioned in front of the handlebars
rearwards so that the lever is resting against the
handlebars. Take hold of the starter handle firmly
with the other hand.
If possible, mow only when the grass is dry. If the grass is wet or excessively long,
perform two cutting passes. Make the first pass at maximum cutting height to avoid
overloading the mower. The second pass should be made at the required finished height.
If grass builds up beneath the mower’s chassis, stop the engine and remove the spark
plug’s cap before cleaning the underside of the cutter deck.
b. Self-propelling
The mower can be self-propelled when in use. When the transmission is operated, the
rear wheels turn automatically. Push and hold the traction bar forward.
Release this bar to stop this function.
c. Stopping
To stop the mower, release the operator control lever. The engine and the blade will stop
turning automatically.
If there is a build
‐
up of grass beneath the chassis, stop the engine, remove the spark
plug’s cap and wait until the engine has cooled before clearing the grass.
6. MAINTENANCE AND STORAGE
Before working on the cutting system of the machine, switch off the engine and
remove the spark plug’s cap.
a. Cleaning the mower
-
Cut grass is damp. Regular cleaning after each use will ensure better functioning of
the mower and reduce the risk of corrosion or seizure.
-
Having finished mowing, allow the engine to cool then remove accumulated grass
clippings from and around the engine with a brush.
-
Clean the grass collection bag annually with a brush or gentle spray of water.
-
Disconnect the spark plug’s cap and tilt the mower on its side with the air filter and
carburettor uppermost.
-
Remove any remaining cut grass from the cutting system with a scraper and a brush.
-
Reposition the mower onto its four wheels.
-
Pull the starter rope firmly until that the motor starts.
