EN
4. PACKAGE CONTENT LIST
▪ Remove all packaging materials.
▪ Remove remaining packing and package inserts (if included).
▪ Check that the package contents are complete.
▪ Check the appliance, the power cord, the power plug and all accessories for transportation damage.
▪ Keep the packing materials as far as possible till the end of the warranty period. Dispose it into your local
waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with plastic bags!
Danger of suffocation!
1x machine 1x manual
1x saw blade for wood
1x sawblade for metal
1x small allen wrench
If any parts are missing or damaged, please contact your dealer.
Note: If any parts are missing or damaged, please contact your dealer.
5. OPERATION
5.1 CHARGING THE BATTERY PACK
NOTE: The battery and charger not delivered in package, you can buy Builder battery platform 1
which used for full range.
1) Take the battery pack out of the equipment. Do this by pressing the side pushlock buttons.
2) Check that your mains voltage is the same as that marked on the rating plate of the battery charger. Insert
the power plug of the charger into the socket outlet. The RED LED will then begin to light.
3) Insert the battery pack into the battery charger .then the red LED on charger will begin to Green flash
light.
4) You will find a label with “Charger indicator” of the LED indicator on the charger.
The battery pack can become a little warm during the charging. This is normal.
If the battery pack fails to charge, check:
Voltage at the power socket
Whether there is good contact at the charging contacts.
Whether the battery pack is warm or not, The battery protection system will not allow the battery to be
charged if the battery temperature is over 40
℃
after use, allow the battery pack to cool to room
temperature before commencing with the charging.
If the battery pack still fails to charge, send the charging unit and the battery pack to our customer service
center.
To ensure that the battery pack provides long service, you should take care to recharge it promptly. You must
recharge the battery pack when you notice that the power of the cordless vacuum drops. Never allow the
battery pack to become fully discharged. This will cause it to develop a defect.
Battery capacity indicator
Press the switch for the battery capacity indicator . The battery capacity indicator shows the charge status of
the battery using 4 LEDs as following:
All 4 LEDs are lit:
The battery is fully charged.
3 LED(s) are lit:
The battery has approx 75% remaining charge.
08
