5
2. Paint sprayer safety warnings
NOTE:
Learn to know your tool. Please read the operator’s manual. Learn the applications and limitations
as well as the specific potential hazards.
WARNING:
TO AVOID THE RISK OF FIRE OR EXPLOSION:
• DO NOT spray flammable or combustible materials near a flame or sources of ignition such as cigarettes,
motors, and electrical equipment.
• The units are intended to be used with materials to base of water or mineral type with a minimum of flash
point of 60 C. DO NOT spray or clean with liquids with a flash point of less than 60ºC.
• The paint or solvent flowing through the equipment can produce static electricity, which creates a risk of
fire or explosion in the presence of fumes from paint or solvents.
• DO NOT use paint or solvent containing halogenated hydrocarbons.
• Spray ONLY at well ventilated areas. Keeps adequate fresh air moving through the area; Keep the pump
assembly in a well-ventilated area.
• DO NOT smoke in the spray area.
• DO NOT use the tool close to motors or similar products that produce sparks.
• Keep the spray area clean and free of containers of paint or solvents, rags, and other flammable materials.
• Warning - Be aware of any hazards presented by the material being sprayed and instruction to consult the
markings on the container or the information supplied by the manufacturer of the material to be sprayed.
• The firefighting equipment shall be available at site and working.
WARNING TO AVOID THE RISK OF SKIN INJECTION:
• DO NOT point the nozzle or spray to any person or animal.
• Keep hands and other parts of the body away from the discharge. For example, do not attempt to stop the
leak with any part of the body.
• ALWAYS use spray gun with tip. NEVER use a spray gun without tip.
• USE ONLY a tip of spray gun specified by the manufacturer.
• Use caution when cleaning and changing spray tips. In the event of spray tip is obstructed while spraying,
follow the manufacturer’s instructions to turn off the unit before removing the spray tip for cleaning.
• Do not leave the unit energized while it is unattended. When the unit is not in use, shut it down in
accordance with the manufacturer’s instruction.
• High pressure spray is able to inject toxins into the body and cause serious injury. In the event of the
injection, seek medical attention immediately.
• Check for signs of damage. Replace any damaged parts.
• This system is capable of producing pressure of 30PSI. ONLY use spare parts or accessories specified by
the manufacturer and with a minimum working pressure of 30PSI.
• Know how to stop the unit quickly. Familiarize yourself with the controls.
• Check that all connections are secure before operating this unit.
If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in
