Dust suction
The dust will be collected by the dust exhaust tube to the vacuum cleaner during use.
To assembly the vacuum cleaner, please follow below steps:
-
Remove the accessories on soft tube of vacuum cleaner.
-
Connect the soft tube to the dust exhaust tube directly.
APPLICATION ADVICE
CAUTION!
Always switched off the tool and unplug it from the power supply before installing.
Please always properly secure the workpiece before working.
Incline the workpiece slightly away from user, it may make planning easily.
Ensure that the openings provided for ventilation of the motor are clear.
Practice first on a scrap piece of material to gauge the correct feed rate and the cut
dimensions.
CAUTION!
Never cut the unsecured workpiece!
The rate of planning and the depth of cut determine the quality of the finish. For rough
cutting, the user can increase the depth of cutting. However to achieve a good finish you
will need to reduce the depth of cutting and advance the tool more slowly.
The proper feed rate will depend on the type of material being cut and the quality
requirement of finish. Normally, the harder material need slower speed.
MAINTENANCE
WARNING
Don’t apply big pressure to the machine.
Best cutting results can be obtained by only a slight pressure on the tool; Forcing and
excessive pressure will damage the blade and cause serious personal injury.
Moving the machine too fast may cause a poor quality of cuting and can damage the blades
or the motor. Moving the machine too slowly may burn or mar the workpiece.
Keep the ventilation openings clear and clean the product regularly.
If something unusual occurs during use, switch off the supply and disconnect the plug.
Inspect and repair the tool before using it again. The repairs must be carried out by a
qualified technician.
10
Summary of Contents for FRB900
Page 16: ......
