Feider Machines FPEP8502P Instruction Manual Download Page 15

12. WARRANTY EXCLUSIONS

THE WARRANTY DOES NOT COVER:

Start-up and setting up of the product.

Damage resulting from normal wear and tear of the product.

Damage resulting from improper use of the product.

Damage resulting from assembly or start-up not in accordance with the user manual.

Breakdowns related to carburetion beyond 90 days and fouling of carburetors.

Periodic and standard maintenance events.

Actions of modification and dismantling that directly void the warranty.

Products whose original authentication marking (brand, serial number) has been degraded,

altered or withdrawn.

Replacement of consumables.

The use of non-original parts.

Breakage of parts following impacts or projections.

Accessories breakdowns.

Defects and their consequences linked to any external cause.

Loss of components and loss due to insufficient screwing.

Cutting components and any damage related to the loosening of parts.

Overload or overheating.

Poor power supply quality: faulty voltage, voltage error, etc.

Damages resulting from the deprivation of enjoyment of the product during the time

necessary for repairs and more generally the costs related to the immobilization of the product.

The costs of a second opinion established by a third party following an estimate by a

SWAP-Europe repair station

The use of a product which would show a defect or a breakage which was not the subject of

an immediate report and/or repair with the services of SWAP-Europe.

Deterioration linked to transport and storage

*

.

Launchers beyond 90 days.

Oil, petrol, grease.

Damages related to the use of non-compliant fuels or lubricants.

*

In accordance with transport legislation, damage related to transport must be declared to carriers

within 48 hours maximum after observation by registered letter with acknowledgement of receipt.

This document is a supplement to your notice, a non-exhaustive list.

Attention:

all orders must be checked in the presence of the delivery person. In case of refusal by

the delivery person, it you must simply refuse the delivery and notify your refusal.

Reminder:

the reserves do not exclude the notification by registered letter with acknowledgement

within 72 hours.

Information:

Thermal devices must be wintered each season (service available on the SWAP-Europe site).

Batteries must be charged before being stored.

15

Summary of Contents for FPEP8502P

















Reviews: