If any fuel is spilled, make sure the area is dry
before testing the spark plug or starting the engine. Fuel vapor or spilled
fuel may ignite.
(1) FUEL VALVE
(2) ON
(3) DRAIN KNOB
5.) Is there a spark at the spark plug?
a. Remove the spark plug cap. Clean any dirt from around the spark
plug base, and then remove the spark plug.
b. Install the spark plug in the plug cap.
c. Turn the engine switch on.
d. Grounding the side electrode to any engine ground, pull the recoil
starter to see if sparks jump across the gap.
e. If there is not spark, replace the plug.
If OK, try to stark the engine according to the instructions.
If the engine still does not start, take the tiller to an authorized Motor Hoes
dealer.
Summary of Contents for FMTC100
Page 7: ...ORIGINAL INSTRUCTIONS 3 STRUCTURAL REPRESENTATIO...
Page 8: ......
