Press the button for depth stop adjustment and insert the depth stop into the auxiliary handle.
The knurled surface of the depth stop must face downward.
Insert the SDS-PLUS drilling tool to the stop into the SDS-plus tools holder 3.Otherwise.the movability of the SDS-plus
drilling tool can lead to incorrect adjustment of the drilling depth.
Pull out the depth stop until the distance between the tip of the drill bit and the tip of the depth stop correspond with the
desired drilling depth.
Selecting drill chucks and Tools
For hammer drilling and chiseling ,SDS-plus tolls are required that inserted in the SDS-plus drill chuck .For drilling
without impact in wood, metal ,ceramic and plastic as well as foe screwdriving and thread cutting, tools without
SDS-plus are used (e.g. drills with cylindrical shank ).
Note:
Do not use tools without SDS-plus for hammer drilling or chiseling! Tools without SDS-plus and their drill chucks
are damaged by hammer drilling or chiseling.
Changing the key type drill chuck
To work with tools without SDS-plus (e.g. drill with cylindrical shank) a suitable drill chuck must be mounted (key type
drill chuck or keyless chuck, accessories).
Mounting the key type drill chuck
Screw the SDS-plus adapter shank into a key type drill chuck. Secure the key type drill chuck with the securing screw.
Please observe that the securing screw has a left-hand thread.
Inserting the key type drill chuck
Clean the shank end of the adapter shank and apply a light coat of grease.
Insert the key type drill chuck with the adapter shank into the tool holder with a turning motion until it automatically
locks.
Check the locking effect by pulling the key type drill chuck.
Removing the Key Type Drill Chuck
Push the locking sleeve toward the rear and pull out the key type drill chuck.
Inserting the Quick Change Chuck
Before inserting, clean the quick change chuck and apply a light coat of grease to the shank end.
Grasp the SDS-plus quick change chuck or the quick change keyless chuck 1 completely with your hand.
Slide the quick change chuck with a turning motion onto the drill chuck mounting until a distinct latching noise is heard.
The quick change chuck is automatically locked. Check the locking effect by pulling the quick change chuck.
Dust protection cap
The dust protection cap largely prevents the entry of drilling dust into the tool holder during operation. When inserting
the tool. Take care that the dust protection cap is not damaged.
A damaged dust protection cap should be changed immediately. We recommend having this carried out by an
after-sales service.
Inserting SDS-plus Drilling Tools
The SDS-plus drill chuck allows for simple and convenient changing of drilling tools without the use of additional tools.
Clean and lightly grease the shank end of the tool.
Insert the tool in a twisting manner into the tool holder until it latches itself.
