The battery has approx 75% remaining charge.
2 LED(s) are lit:
The battery has approx 50% remaining charge.
1 LED is lit:
The battery will be empty soon, please recharge the battery.
6.2 CHARGER INDICATOR
Indicator status
Explanations and actions
Ready for use
The charger is connected to the mains and is ready for use; there is no battery pack
in the charger.
Charging
The charger is charging the battery pack in charge mode.
Battery pack is full of charge.
Charging is finished and battery pack in the charger.
The temperature of battery is too high or too low, the charger is under protection
status. The charging function can be recovered after the temperature is normal.
Unrecoverable battery malfunction.
6.3 INSERTING AND REMOVING THE BATTERY.
WARNING: Before making any adjustments ensure the drill is switched off with the direction
of rotation selector in the center position
1.
Remove the battery: press the battery release latch in and at the same time pull the battery pack off.
2.
To insert the battery, push the battery pack onto the contacts of the tool.
6.4 FITTING THE AUXILIARY HANDLE (FIG. 1)
The auxiliary handle (6) can be attached to the angle grinder in 3 different positions: left and right and top of
head.
6.5 ASSEMBLY THE PROTECTIVE GUARD (FIG. 2
– 3)
1. Loosen the clip of the protective guard (7) by pulling lock lever of protective guard (1) outward.
12
