ORIGINAL INSTRUCTIONS
9
8. Plug into electrical outlet, the same to voltage on rating plate.
9. Turn on power switch.
10. Select power on handle.(as shown in picture 4)
11. It takes approximately 20 seconds for the unit to heat up and the steam to be ready.
12. Wait seconds,dampen the micro-fiber cleaning pad first, then begin mopping with a forward and
backward motion,it will release steam as you mop.
13. When water tank is empty, the steam cleaner will stop emitting steam.Unplug the power cord
from the electrical outlet and refill the water tank following the instructions above.
14. To clean the tile at home, remove cleaning pad, and put carpet glider on the mop.
steam cleaner utilizes steam to remove tough grease,dirt and grime.Cleaning house without using
harsh chemicals, therefore it is perfectly environmental friendly. It can be used to clean your
tile,hardwood,ceramic tile,linoleum and vinyl floors.
1.Quick&easy
Eliminates rinsing, wringing, carrying buckets of water and redistributing the dirt on the floor.Save
your time to clean up the floors.
2.Sanitizing
Powerful steam helps for superior cleaning and sanitizing.
3.No chemical used
Use tap water or distilled water, perfectly ecological.
4.Quick Start-up
Steam is ready in just 20 seconds
5. Reusable and washable cleaning pad
6. Battery type: AAA
If you consistently use distilled water,cleaning the water tank is not necessary.
Caution:
This appliance must be unplugged from the electrical outlet before performing any cleaning or
maintenance tasks on the unit.
Care the micro-fiber cleaning pad
1. Wash the pad with a mild detergent.
2. Put it in washing machine using the warm water setting,and separately from other fabrics or
placing them in a garment bag first.
