GB
6
(e.g. knots, logs of irregular shape etc.)
27.
Operator must receive necessary training and instruction from a qualified
person before handling the tool.
28.
Use the tool only for the intended use. Misuse (such using material other than
log) can damage the tool and cause accidents and injuries.
29.
The splitting operation of the machine is designed to be activated by one
person. While there is the possibility that additional operators could be working
with the machine (e.g. for loading and unloading), only one operator should
activate splitting operations.
30.
The machine shall not be used by children.
31.
Wear suitable personal protective equipment (PPE), including safety footwear;
close fitting clothing and suitable work gloves, eye protection and hearing
protection.
32.
Before starting work, hydraulic pipes and hoses shall be inspected and the
stopping devices shall be tested.
33.
Tests of the machine's safety devices before use the tool. If safety devices do
not work properly, do no use the tool and bring it to a qualified technician for
inspection and reparation.
34.
The working area shall be free from obstructions; before installation and
operation, clear the working area. Keep the working area free from
obstructions, e.g. logs, split wood, etc.
35.
Do not leave the machine unattended when running;
36.
Do not reach into the splitting zone;
TRANSPORTING THE WOODEN SPLITTER TO THE PLACE OF WORK
The log splitter is equipped with 2 wheels for minor displacements. To move the
log splitter to your workplace, roll log splitter at a slight angle after making sure the
oil tank cap is tight.
Do not lift or carry the log splitter to move it.
Electrical Safety
WARNING!
Always check that the power supply corresponds to the voltage on the
rating plate.
WARNING! Connect the main leads to a standard 230V±10% (50Hz±1Hz)
electrical supply which has protection devices of under-voltage, over-voltage,
over-current as well as a residual current device (RCD) which maximum
residual current rated at 30mA.
Replacing cables or plugs
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
