Chapter 4: Instructions for use
Warning: Before reading the instructions for use, make sure you understand the above and keep it in mind.
1
)
Start the machine
●
Before starting, please check if the accessories you have assembled are completely fixed.
1. At the position of the marked organic oil label, turn on the oil dipstick and add the same amount of oil according to the oil capacity provided in the
parameter table of this manual (page 11).
2. In the position marked with the fuel label, unscrew the fuel tank cap and add the same amount of gasoline according to the fuel capacity provided
in the parameter table of this manual (page 11).
3. Make sure the microswitch rocker arm is closed. (See Fig 14-1, 2)
Fig.14-1
Switch rocker- Open state
Fig.14-2
Switch rocker- Closed state
4. Please pull the throttle handle to the start state
。
(See Fig 15-1, 2)
Fig.15-1
Throttle handle- Engine stop
Fig.15-2
Throttle handle- Engine start
6. Pull the engine start handle to start the engine. (See Fig 17)
●
Note: Before you pull the handle, please pay attention to your surroundings
,
Clean up items that are sharp and can hurt your arms.
Fig.17 Start the machine
6. Adjust the engine to the maximum speed. (see Fig 18-1, 2)
Fig.18-1
Throttle handle- Engine startup state
Fig.18-2
Throttle handle - Maximum speed status
Switch rocker
Switch rocker
Throttle handle
Press to the front end
Pull to the middle position
Leave gap size, size is
two index fingers
14