g)
Support any oversized workpiece to minimize the risk of wheel pinching and kickback.
Large
workpieces tend to sag under their own weight. Supports must be placed under the workpiece near the
line of cut and near the edge of the workpiece on both sides of the wheel.
1.3 SPECIFIC SAFETY INSTRUCTIONS
a)
Make sure the cut-off wheel is securely mounted as described in the assembly instructions before
connecting the tool to a power supply. Do not tighten wheel excessively, since this can cause cracks.
b)
Check wheel for fissures and cracks, and test for normal operation prior to use.
c)
Use only cut-off wheels rated for 4400 rpm or greater and manufactured in compliance with ANSI B7.1.
Always store the wheels in a dry place with little temperature variation.
d)
Always ease the abrasive wheel against the work piece when starting to cut. A harsh impact can break
the wheel.
e)
Always press the trigger switch and allow the cut-off wheel to reach full speed before cutting.
f)
Ensure that the cut-off machine is always used on a stable and level surface and instruction how to
secure the machine if used on a workbench.
g) Wear hearing protection, and protective gloves when handling wheels.
h) The wheel is a bonded reinforced wheel. This wheel can be used for different applications.
i)
Use blotters, when they are provided with a bonded reinforced product.
j)
This machine is designed to cut different shapes of metals, steel bars, using the grinding wheel provided.
Do not use it to cut wood or plastic.
Symbols explanation
To reduce the risk of injury, the user must read and understand this
manual before using this product.
Wear protective goggles
Wear ear protectors. Exposure to noise can cause hearing loss.
Wear respiratory protection.
In accordance with essential applicable safety standards of European
directives.
Double insulation.
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
6
