FEI Quanta FEG 250, User'S Operation Manual

Page: 29 / 228

4-1
4
SOFTWARE CONTROL
This chapter gives an overview of the xT microscope Control
(referred to as UI or sometimes xTUI in dialogue boxes),
xT microscope Server and FEI User Management software, and
describes the functionality of each part of the user interface. It takes
you from the first main window and menu bar through each item on
the pull-down menus. Graphics illustrating most of the choices help
you to locate the specific features.
The software interface controls most system functions, including
imaging, image and movie gathering / manipulation / output, detection
and analysis, stage and pressure.
OTHER SOFTWARE AND HARDWARE
Call Customer Service for advice before installing software or
hardware that is not required for system operation. Other software,
such as screen savers or hardware network cards, may corrupt the
xT microscope Server / Control software under some circumstances
and may invalidate warranty.
For more detailed information about Windows XP, refer to the
Microsoft® Windows™ User’s Guide shipped with your system.