Step 1
Step 2
Step 3
Step 4
Lay the panels on the floor flap side down
as pictured.
Lay the corners in a square so they form
a square and create the bottom of the pit.
Pull the flaps to the center of the square.
Stand the panels up. Making sure the flap
is tucked under the panel.
Make sure the panels meet as pictured
above.
Step 5
Step 6
Step 7
Step 8
Begin tying the panels together with
connecting string. Loop the string
between the two bottom grommet holes.
Take the string on the right and loop it
through the second grommet hole.
Pull the string through the grommet hole
directly across from the second hole.
Repeat with on the left side. The first and
second grommets should look like the
photo above.
Assembly Instructions
FABRICATION ENTERPRISES INC
•
PO Box 1500, White Plains, NY 10602 (USA)
•
tel: +1-914-345-9300
•
fax: +1-914-345-9800
•
FabEnt.com
3/17
