5
INSTRUCTIONS FOR USE
Installation
Place the phone/speaker on the cradle. For first time use, we suggest you to charge the device
for 4 to 5 hours.
Charging the Phone/Speaker –
1) Connect power adaptor to the DC jack of the speaker and the power adaptor connect to
the power supply.
2) Or, connect the USB charging cable (provided) to the USB charging port of the speaker.
The other end of the charging cable which connect to your computer / other suitable
USB outlet.
Place the Phone/Speaker on the Cradle. Red light would light up to indicate that device is
charging. Once the device is fully charged, the red LED will be turned off.
How to Turn ON the Bluetooth Phone/Speaker –
Long Press the Power ON/OFF Button for 5 to 6 seconds until you hear the beep tone.
How to go on Bluetooth Pairing Mode –
Long Press the Power ON/OFF Button for 8 to 10 seconds until you hear the beep tone.
(Note: While you long-press the ON/OFF Button, first you would hear beep tone but do not release the button as device first turns on,
continue pressing the button until you go into Pairing Mode. )
Once you go into pairing mode, you would see both Blue & Red lights blinking
Connect using Bluetooth Technology
To connect to any Bluetooth enabled device, you need to first go on Pairing Mode. Long Press
the Power ON/OFF Button for 8 to 10 seconds until you hear Beep Tone and you see both Blue
& Red Light flashing. You are now in Pairing Mode.
Activate the Bluetooth function on your Bluetooth Device (Mobile Phone or Tablet). Please refer
to manufacturer’s instructions for instructions on enabling Bluetooth on your device.
