Skyus 4G AT&T Quick Start Guide
Figure 9: 4G Antenna Connections
Connecting to Computer or Router
Connect the Type A Male side of the enclosed USB cable to your computer or alternate host device.
Connect the Mini B Male side of the enclosed USB cable to the Skyus.
Figure 10: Type A Male USB
Figure 11: Type Mini B Male USB
Power is provided by the USB cable. Once connected, your Skyus will power up and attempt to register to the carrier.
Activation
Your Skyus 4G LTE will typically include a SIM already inserted. Provide the IMEI and SIM IC (ICCID) from the device
label to your FW representative or carrier representative to activate your Skyus 4G LTE device.
Your device is ready to be activated only after the cellular carrier sets up an account and provides a phone number,
APN (Access Point Name), and/or IP address for your device. If you are not sure if your device has an account, contact
your sales representative or FW technical support.
Provisioning
Once your device is activated and you connect to the cellular carrier for the first time, your device will perform Over
the Air provisioning. (If required)
The Skyus 4G LTE will provision over the air automatically upon initial power up. Please connect it to a host and wait
45 minutes to allow this process time to complete prior to attempting to connect or unplugging the device.
If necessary, manual configuration of this parameteris typically done via connection manager software or
alternatively the
at+cgdcont
AT command. Contact FW technical support for more details.
Antenna Connection
7
