Exit menu after modifying parameter to save it
3.3.7
Version
Move the pointer to the (VERSION) in the Main Menu, click the
【
HOME
】
and enter the
(VERSION) as follow
VERSION
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
MCU Version
3.2.0
Camera Version
1.0.0
AF Version
1.0.0
[Menu]Back
MCU Version:
Display MCU version information
Camera Version:
Display camera version information
AF Version:
Display the focus version information
3.3.8
Restore Default
Move the pointer to the (VERSION) in the Main Menu, click the
【
HOME
】
and enter the
(VERSION) as follow.
RESTORE DEFAULT
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
Restore Default?
NO
[
↑↓
]Select
[
← →
]Change Value
[Menu]Back
[Home]OK
Restore default:
Yes/No ;( after restoring default, the language, color, and video
format won’t be restored)
If the address of former remoter is not 1 but another one from
2,3,4,the corresponding camera address will restore to 1 when all parameters or
system parameters are restored. User should change the remoter address to be 1
(press No.1 according to the camera so to get normal operation)
Summary of Contents for UHD4K12X
