11
12
Air hoses connect with the
air nozzle
and power line
plug connect with
the
socket
④
①
②
③
④
⑥
Unscrew the bolt from hanger of legrest.
Connect the legrest's air hose with the corresponding air nozzles of the main body tightly.
Connect power line with power socket tight.
raise the rotation shaft board on hangers, raise the legrest with hands, put rotation shaft
into hangers on main body, and put rotation shaft board down.
Screw it back tight.
Connect the legrest leather piece with seat by velcro .
⑤
▲
Caution: Make sure the air tube and wires cannot twist together.
③
②
Rotating stand on
the side of chair body
Fixed hole
Fixed panel
①
②
Inner plate of armrest
Air tube
Power cord
1
2
②
③
Cylindrical plug
Assembly steps
⑤
▲
CAUTION:
Do not squeeze the air tubes during the installation. This may cause air leakage
or the air bags are not inflatable.
Please make sure that the fixed plate and LED wire need to be plugged firmly,
otherwise the armrest may drop or LED light does not shine.
②
③
④
Insert the rear armrest fixed plate into the fixing hole on the chair body.
⑤
Remove the rubber plug of the armrest, spin the screws inside the hole tightly then put on the
rubber plug tightly.
①
Lift the armrest and plug it into the rotating stand on the side of the chair body.
Put the power plug into the socket.
Connect the air hose of armrest with the air tubes on the seat tightly, the black air tube should be
connected with the air hose marked with "1" and the grey air tube should be connected with the air
hose marked with "2".
④
①
④
⑤
⑥
Paste the leg-rest hanging leather
velcro on the seat.
Installation
Installation
( )
3
Installation
Installation
Installation
( )
4
Installation
Step 2. How to assemble the legrest
Hanger
Bolt
Air nozzle
Socket
Axis
Power line plug
Air tube
Air tube
Power line
Axis
cover
Lift the legrest to
put the axis into
the hanger
Step 3 How to assemble the left and right armrest
.
Put down the Axis cover
And screw On the bolt
③
