STEP V Assemble the door frame like the diagram, secure the corners of the door frame using the door cable set.
Pull the door cover onto the door frame and seal it with the velcro.
STEP VI Attach the door lock. Make a small hole through the fitted door cover to match the hole that is pre drilled on
the door (Tube No.15), make it small enough so just a screw can fit through. Next thread through the locking screw
and tighten use screw M6X37.
STEP VII Screw tube 12,13, 14, and 15 to tubes 6, screw bolt in from the other side of tube 8 (Use screw M6X40)
STEP VIII
–
Position and screw bracing bars (10 and 11) into place
–
see first diagram to view all positions. (Use screw
M6X40)
Page 5 of 6
