STEP V Assemble the door frame like the diagram, secure the corners of the door frame using the door cable set. Pull the door cover
onto the door frame and seal it with the velcro.
STEP VI Attach the door lock. Make a small hole through the fitted door cover to match the hole that is pre drilled on the door
(Tube No.18), make it small enough so just a screw can fit through. Next thread through the locking screw and tighten like the
picture.(Use screw M6X40)
STEP VII Screw tube 13, 14, 15 and 16 to tubes 5, the tubes already have the thread and nut inside – screw bolt in from the other
side of tube 5 (Use screw M6X40)
STEP VIII – Position and screw bracing bars (7, 8 and 9) into place – see first diagram to view all positions. (Use screw M6X40)
Summary of Contents for PY6
Page 3: ...Page 3 of 7 ...