WARRANTY CONDITIONS
The machine designed, manufactured or marketed and supplied by
Feeder Leader Company
Ltd
is warranted against faulty workmanship and defective materials for a period of 12 months
from date of purchase. Such warranty is subject to the following conditions.
1. This warranty covers the repair or replacement of parts or machinery sold by
Feeder Leader
Company Ltd
and damaged as a result of faulty workmanship or materials in such part or machinery.
It does not extend to any other loss or damage including consequential loss or damage or loss to
other property.
2. No responsibility will be accepted for repairs made other than by
Feeder Leader Company Ltd
or its
accredited agent and without prior authorisation by
Feeder Leader Company Ltd
.
3. Without limiting the generality of paragraph 1, above this warranty does not cover the following:
(a) Losses sustained through delay in delivery.
(b) Travel expenses.
(c) Damage caused by accident, misuse, abuse or when operated outside of conditions for which it
was designed or as deemed appropriate by
Feeder Leader Company Ltd
.
(d) Damage to any other goods which have been altered or modi
fi
ed by someone other than
Feeder
Leader Company Ltd
or its authorised dealer.
(e) Damage or loss to the goods due to their unsuitability for any particular use or for using with any
particular tractor except where such use or tractor has been speci
fi
cally approved by
Feeder
Leader Company Ltd
.
(f) Damage or loss where the
fi
tting and installation of the goods was not carried out by
Feeder
Leader Company Ltd
or its authorised dealer.
(g) While every effort is made to keep up with any changes in tractor design and speci
fi
cation
Feeder
Leader Company Ltd
will not be liable for alteration to their goods as a result of such changes.
(h) Components such as hydraulic control valves, hydraulic rams and divertors. These are supplied
subject to the warranty given by their manufacturers.
4. Procedure for recovery under warranty:
No loss or damage will be covered under warranty unless the following procedure is followed by the
purchaser.
(a) If the purchaser is an authorised dealer:
(i)
Feeder Leader Company Ltd
must
fi
rst be advised of details of the goods concerned, the
loss or damage sustained and the circumstances in which the loss or damage arose.
(ii)
Feeder Leader Company Ltd
will then decide if such loss or damage is within the terms of
warranty and shall advise the dealer as to how the loss or damage is to be repaired.
(iii) When
Feeder Leader Company Ltd
accepts responsibility for the loss or damage a
Warranty order number will be issued and
Feeder Leader Company Ltd
shall advise the
sum allowed for the repair taking into consideration time required to make, repair materials
and other relevant factors.
(iv) The dealer should then commence to carry out the necessary repair or replacement work as
instructed.
(v) A claim form will be sent to the dealer and must be submitted in writing to
Feeder Leader
Company Ltd
within 14 days of the date of the Warranty Order No being issued.
Such claim must include
Feeder Leader Company Ltd
Serial No, original Invoice No and
Of
fi
cial Company Order No.
(vi) Where the claim is approved the dealer’s account will be credited for the sum authorised.
(b) If the purchaser is not an authorised dealer:
The loss or damage should be reported directly to
Feeder Leader Company Ltd
who will advise
whether it is covered by the warranty and direct the purchaser accordingly as to what action is to
be taken.
Please remember to
fi
ll in and return the Warranty Registration form on the back page of this manual.
page 1
