feedback 45134 Operating Instructions Manual Download Page 9 | Manualshive

Page: 9 / 11

feedback 45134 Operating Instructions Manual Download Page 9

9

North American Tool Industries (NATI) makes every effort to ensure that this product meets high quality

and durability standards. NATI warrants to the original retail consumer a 1-year limited warranty from the

date the product was purchased at retail and each product is free from defects in materials. Warranty

does not apply to defects due directly or indirectly to misuse, abuse, negligence, or accidents, repairs or

alterations, or a lack of maintenance. NATI shall in no event be liable for death, injuries to persons or

property, or for incidental, special, or consequential damages arising from the use of our products. To

receive service under warranty, the original manufacturer part must be returned for examination by an

authorized service center. Shipping and handling charges may apply. If a defect is found, NATI will

either repair or replace the product at its discretion.

DO NOT RETURN TO STORE

For Customer Service:

Email: feedback@natitools.com or Call 1-800-348-5004

feedback@natitools.com

1-800-348-5004

«
...
7
8
9
10
11
»

Summary of Contents for 45134












Reviews:

No comments