Press the rear wheel release button in the middle of the rear wheel as in the picture 1 and connect
to axle 2.
Follow the same way for the other side of wheel. Insert coupled axis to frame as shown 3 until
there is a clicking sound. In case click sound is not heard when wheel axle is connected to frame,
please check for making sure wheel does not fall out when pulled by hand before use.
In case the frame is completely folded after stroller is opened, rear wheel axle assembly may not
be smooth. In this case, unfold the frame firstly following the instructions in step 2 and assemble the
rear wheel axle.
3. Assembly
1. Rear wheel / rear wheel axle assembly
2. Main frame unfolding
To unfold the stroller, please release the folding lock ① as shown in figure 1 first. Firstly, grab the
handle with one hand and grab the folding handle ③ on both sides with the other hand and pull
the handle ② to arrow direction, then frame will be unfolded.
Be careful not to put your fingers in the folding area when unfold the stroller.
Please check again to make sure stroller is unfolded and fixed properly.
Before you unfold the stroller, Please check there is no kid around.
In case rear wheel release button does not restore to its original position when it is pressed,
please separate it by pressing one more time and assemble it again. If the same symptom
occurs even though same procedure is taken one more time, do not use it and contact the
store where you bought the stroller and get replacement or use it after A/S. Please check
once again whether wheel is connected to wheel axle properly, and wheel axle is connected
to the frame properly.
Attention
Attention
Picture 1
Picture 2
Summary of Contents for S9
Page 1: ...Instruction manual ...
