Series ’90 Non-Refrigerated Bakery
Page 6
Grill Removal
The front of the case has a removable base panel to access the front leg levelers from the inside of
the case. Normally it is not necessary to remove the panel to install the case. This panel must be in
place for proper operation of the case.
There are two (2) removable panels on the back of the case. The left side panel allows access to the
lamp ballasts and the field wiring connection box. Remove this panel to make field wiring
connections.
The right side panel has the light switch and the auxiliary fan switch mounted to it. Removing the
panel allows access to the terminal board. Normally it is not necessary to remove this panel to
install the case.
Lights
Make certain that the light cord plugs are completely inserted into the sockets or arcing may result
causing damage to the plugs and sockets.
The ballasts used on this case allow removal of one or more shelf light without affecting the
remaining lights.
DANGER:
Electrical Shock Hazard. Do not operate
unit with panels removed.
Summary of Contents for SN48
