Weekly Cleaning
NOTICE:
Avoid splashing or soaking any electrical components with water to prevent
electrical damage to the case.
NOTICE:
Shut off lights and power switches and remove all products from case. Allow
sufficient time for the unit to reach room temperature before proceeding
with cleaning.
NOTICE:
Remove all products from case before proceeding with cleaning procedure.
NOTICE:
Acrylic front air deflector requires special washing procedures to prevent
hazing and yellowing of material.
Note: Detergents are not recommended and do not use abrasive cleaners or pads to prevent
scratching of surfaces.
1.
Remove interior shelving from unit as described in the “Shelving Installation and Removal” section of
this manual.
2.
Dip rag in warm soapy water and ring out thoroughly. Clean all shelves and shelf brackets and dry with
soft dry towel.
3.
Lift the display decks up and out of evaporator tub.
4.
Clean the display deck(s) using warm soapy water and a brush. Rinse thoroughly and allow dry. Wipe
off fan shroud assembly (do not rinse or submerge fan motors).
5.
Clean the entire interior of the case using warm soapy water. Wipe off all soapy water with a damp
cloth and allow to dry. (DO NOT use solvents such as Acetone, Benzene, Carbon Tetrachloride, and
Lacquer Thinners)
6.
IMPORTANT: Cleaning the clear acrylic plastic front air deflector requires special care to
prevent hazing and yellowing of material
.
Clean as described in “Acrylic Air Deflector Cleaning”
section of this manual.
7.
Reassemble all components in reverse order.
NOTE: Depending on the amount of usage and spillage of foreign material, some fasteners may have to be
removed and parts disassembled to allow proper cleaning of the unit.
Refrigerated Self-Serve Merchandiser (High Profile)
Page 22
