SECTION V
CONFIGURATION
WARNING
Property damage, serious injury, or death to
you or others may result if the Vision warning
system is improperly configured. Configuration,
if required, is to be performed at the time of
installation. It is NOT intended for operators
to “cus-tomize” the Vision’s operation for their
individual preferences. It is the USER’s re-
sponsibility to determine compatibility, suita-
bility, and ensure proper configuration of the
Vision warning system.
The person responsible for configuration
MUST be familiar with local codes and proce-
dures for safe emergency vehicle warning
system operation.
CONFIGURATION INSTRUCTIONS
The Vision is an extremely versatile and config-
urable warning system. Take-down lights, alley
lights, secondary and primary warning light pat-
terns, and the optional SignalMaster directional
warning signals are all available with the “standard”
keyboard configurations. Also, control of auxiliary
devices (headlight flashers, grille lights, etc.) is
available.
For configuration instructions, refer to the
supplied Operation and Configuration Instructions.
5-1
Summary of Contents for VISION
Page 1: ...VISION WARNING SYSTEM HARDWARE INSTALLATION AND MAINTENANCE INSTRUCTIONS Price 15 00...
Page 2: ......
Page 23: ...6 7 Figure 6 8 Bar Control Printed Circuit Board Figure 6 9 Lamp Driver Printed Circuit Board...
Page 24: ...6 8 Figure 6 10 SignalMaster Printed Circuit Board 255247C REV C 1093 Printed in U S A...
