Permanent Mounting Kit for the Split Vision SLR
4
VSLR3, VSLR6, and VSLR8 Mounting Kits
Federal Signal
www.fedsig.com
6.
Secure the light bar to the roof using the 1/4 by 3/4-inch black stainless steel thread-forming screws
and tighten them securely. The Split Vision SLR should now be solidly anchored to the roof. See
Figure 3.
Figure 3 Bracket secured to vehicle roof
Mounting Bracket
Thread-Forming Screw
Vehicle Roof
Mounting Pads
(3 in Back, 1 in Front)
7.
Ensure that all fasteners are tightened properly.
IMPORTANT:
Frequently inspect the light bar to ensure that all fasteners and brackets are tight.
Getting Technical Support
For technical support, please contact:
Federal Signal Corporation
Service Department
Phone: 1-800-433-9132
Fax: 1-800-343-9706
Email: [email protected]
Getting Repair Service
The Federal Signal factory provides technical assistance with any problems that cannot be handled
locally. Any product returned to Federal Signal for service, inspection, or repair must be accompanied
by a Return Material Authorization (RMA). Obtain a RMA from a local Distributor or Manufacturer’s
Representative. Provide a brief explanation of the service requested, or the nature of the malfunction.
Address all communications and shipments to the following:
Federal Signal Corporation
Service Department
2645 Federal Signal Dr.
University Park, IL 60484-3167
2645 Federal Signal Drive
University Park, Illinois 60484-3167
www.fedsig.com
Customer Support
Police/Fire-EMS:
800-264-3578 • +1 708 534-3400
Work Truck:
800-824-0254 • +1 708 534-3400
Technical Support:
800-433-9132 • +1 708 534-3400
© Copyright 2019 - 2020 Federal Signal Corporation
