Federal Signal Corporation Split Vision VSLR3 Installation Instructions Download Page 4

Page: 4 / 4

Mounting the

Split Vision SLR on a Vehicle

Mounting Kit for Models VSLR3, VSLR6, and VSLR8

Figure 2 Lightbar with brackets installed

RH MOUNTING

BRACKET ASSEMBLY

LH MOUNTING

BRACKET ASSEMBLY

SIDE VIEW, PASSENGER SIDE

290A6998

FRONT

LARGE OFFSET,

FRONT

BOTTOM VIEW, PASSENGER SIDE

Figure 3 Bracket assembly secured to vehicle

290A6849

MOUNTING BRACKET

MOUNTING PADS (2)

1/4" x 3/4" THREAD-

FORMING SCREW

VEHICLE ROOF

Summary of Contents for Split Vision VSLR3

Page 1: ...ons and information File these instructions in a safe place and refer to them when maintaining and or reinstalling the product Do not stare directly into the lights at a close range or permanent damag...

Page 2: ...ch of the adjustable mounting brackets using the 1 4 20 x 3 4 carriage bolts 1 4 flat washers and 1 4 elastic stop nuts 3 Assemble the LH and RH adjustable mounting bracket on the factory installed ca...

Page 3: ...ld be de burred and all sharp edges should be smoothed All wire routings going through drilled holes should be protected by a grommet or convolute split loom tubing 4 Before drilling move the lightbar...

Page 4: ...tbar with brackets installed RH MOUNTING BRACKET ASSEMBLY LH MOUNTING BRACKET ASSEMBLY SIDE VIEW PASSENGER SIDE 290A6998 FRONT LARGE OFFSET FRONT BOTTOM VIEW PASSENGER SIDE Figure 3 Bracket assembly s...