Installation and Programming Instructions
7
SignalMaster
™
Model 330104 SMC1 Light Bar Controller
Federal Signal
www.fedsig.com
3.
Angle the controller for optimum visibility from the operator’s position before tightening the screws.
4.
Dress the cables and wires, and secure them out of the way.
Configuring the Controller
The controller has several installer-selectable warning patterns that you can select after the installation
and wiring of the SignalMaster™ system is complete. For the functions of the controller buttons, see
Figure 3 and “Operating the SignalMaster Controller” on page 9.
Figure 3 Model 330104 SMC1 controller
290A5503B
Left Arrow
Right Arrow
SignalMaster
Center Out
Warn
LED Indicator
Table 6 Standard warn patterns
Pattern
No.
Description
0
Null (no pattern)
1
Center lights alternate with lights at each end
2
The lights alternate on each half of the light bar
3
Moving triple flash
4
Quad flash with full bar accent
5
Random 1, single heads
6
Fast ripple out
7
Random 2
