12
PAGASYS Series Loudspeaker
Figure 2 Loudspeaker connections for P-LS2B-8 and P-LS2C-8
290A7003
AUDIO INPUT
FROM AMPLIFIER
+IN
EARTH
AUDIO INPUT
FROM AMPLIFIER
–IN
To wire the loudspeaker:
1. Loosen the four screws securing the rear cover to the loudspeaker,
and remove the cover.
2. Route the lead from the audio input to the terminal IN.
3. Route the lead from the amplifier to the terminal marked –IN.
The +OUT/–OUT terminals may be used to connect to an additional
speaker, if required. Loudspeakers in close proximity must be
connected in phase.
Summary of Contents for P-LS2B
Page 2: ...blank page ...
