8
Installation and Maintenance Instructions
LED Traffic Clearing Light Model LEDTCL64
To select a flash pattern:
1.
Apply power to the light head
2.
Briefly touch the
GREEN
program/sync wire to the positive
power source terminal.
3.
Advance to the next pattern as needed.
4.
Let the pattern run for at least 15 seconds to store it in
memory.
Safety Message to Operators
People’s lives depend on your safe use of our products. Listed
below are some important safety instructions and precautions you
should follow:
• Although your warning system is operating properly, it may
not be completely effective. People may not see or heed your
warn ing signal. You must recognize this fact and continue
driving cautiously.
• Also, situations may occur which obstruct your warning signal
when natural or man-made objects are between your vehicle
and others, such as raising your hood or trunk lid. If these
situations occur, be especially careful.
• This product contains high intensity LED devices. To prevent
eye damage, DO NOT stare into the light beam at close range.
• At the start of your shift, you should ensure that the light is
securely attached and operating properly.
Failure to follow these safety precautions may result in property
damage, serious injury, or death.
