Installing the Top Channel with IMPAXX or MicroPulse Lights to the PBX Push Bar
2
Two- or Four-Light Top Channel
Unpacking the Product
After unpacking the product, inspect it for damage that may have occurred in transit. If it has been damaged,
do not attempt to install or operate it. File a claim immediately with the carrier, stating the extent of damage.
Failure to identify damage before installation could lead to rejection of any claim.
Carefully check all
envelopes, shipping labels, and tags before removing or destroying them. Ensure that the parts listed in
Table 1 are included in the package. If you are missing any parts, contact Federal Signal Customer Support
at 1-800-264-3578, 7 a.m. to 5 p.m., Monday through Friday (CT). Disposal of all shipping materials must be
carried out in accordance with national and local codes and standards.
PUSH BUMPER PRECAUTION: Installing a push bumper on a vehicle may raise the vehicle's
minimum collision speed for airbag deployment. It is imperative that police officers wear safety belts
when operating their motor vehicle. Failure to follow this warning may cause serious injury or death.
THREAD DAMAGE AND GALLING: To prevent thread damage and galling, anti-seize lubricant must
be used on all stainless steel fasteners.
Table 1 Kit contents and tools needed
Item Qty. Description
Tools Needed
1
1
Top Channel Assembly
Allen Wrench
2
14 M4 Short Button-Head Screw
Screwdriver
3
14 M4 Flat Washer
4
14 M4 Toothed Lock Washer
5
8
M4 U-Clip Nut (MicroPulse only)
6
8
M3 Hex Nut (MicroPulse only)
7
8
M3 Split Lock Washer (MicroPulse only)
8
2/4 Steel Adapter Plate
9
8/16 M3 Phillips Pan Head Screw (MicroPulse only)
10
16 M3 Flat Washer (MicroPulse only)
