manualshive.com logo in svg

Federal Signal Corporation I-IP15, Description, Specifications, Installation, Operation, And Service Manual

Share
Download
Federal Signal Corporation I-IP15 Description, Specifications, Installation, Operation, And Service Manual Download Page 3

3

Description, Specifications, Installation, Operation, and Service Manual

 

Federal Signal

 www.fedsig.com

Contents

Safety Messages......................................................................................................................................................5

Safety Messages to Installers .............................................................................................................................5

General Description ................................................................................................................................................8

Overview .............................................................................................................................................................8
Features ..............................................................................................................................................................9
Ordering Information .........................................................................................................................................10

Specifications ........................................................................................................................................................10

Installation ..............................................................................................................................................................13

Flat Surface Mounting .......................................................................................................................................14
Opening the Housing ........................................................................................................................................15
Wiring the Network and Power Connections ....................................................................................................15

PoE model (See Figure 2) ........................................................................................................................15
24 Vdc model (See Figure 3) ....................................................................................................................16

Wiring to the Controller Board ...........................................................................................................................16
Closing the Housing ..........................................................................................................................................18

Testing ....................................................................................................................................................................18

Maintenance ...........................................................................................................................................................18

Ordering Replacement Parts ............................................................................................................................19

Getting Service ......................................................................................................................................................19

Figures

Figure 1 Depth and Height of Informer15 Speaker .............................................................................................14

Figure 2 I-IP15 PC Boards.....................................................................................................................................15

Figure 3 I-IP15-024 PC Boards .............................................................................................................................16

Summary of Contents for I-IP15





















Reviews:

No comments

Brands by name

Popular brands

Load more brands