9
General Description
Description, Specifications, and Installation Manual
Features
The Informer100 has the following features; some features require the use of the
Commander software system:
• High-powered outdoor or indoor IP-enabled speaker for audible and visual alerts
• Speaker rated at 120 dBa for tones and 114.5 dBa
for voice at 10 feet
• Seven standard built-in warning signals: Wail, Steady, Alternate Wail, Alternate
Steady, Pulsed Wail, Pulsed Steady, Auxiliary Chime
• Broadcasts live voice, text-to-speech and prerecorded voice or tone files
• Deliver intelligible voice messages from locally pre-recorded files or through the
Commander system
• Pre-recorded files: 250 messages with 15 minutes of recording time
• Ambient noise level monitoring with automatic volume control
• Each device can be individually configured for volume and noise-level adjustments
• Remote volume control for optimizing sound levels
• Speaker as microphone for talk back feature
• Alerts can be sent to single devices, groups or zones, or all devices
• Commander Software control and activation
• Wall or pole mount options
• Four local alarm initiation inputs to activate unit locally or standalone operation
Momentary mode: contact closure sounds alarm for programmed duration.
Continuous mode: sounds alarm for duration of closure.
• Two relay outputs to control strobes or other devices
• 120/240 Vac or 24 Vdc powered (two models)
• Wide outdoor temperature operating range
• Federal Signal Commander software provides full two-way control and status
monitoring
• Allows remote software upgrades
• The lnformerl00 models are designed specifically for use in Class I, Division 2,
Groups A, B, C, D; Class II, Division 2, Groups F and G; and Class Ill locations as
defined in the National Electrical Code (NEC) ANSI/NFPA 70.
