d.
Connect the red and black wires to the new
mechanism assembly. Be sure to observe the correct
polarity.
e.
Install the new mechanism in the housing and
secure with the previously removed phillips screws.
f.
Replace the lens and trim ring and secure
with the previously removed screws.
E.
REPLACEMENT PARTS.
Description
Part No.
Lens, Blue, Fluted
8575095-01
Lens, Red, Fluted
8575095-03
Lens, Amber, Fluted
8575095-05
Gasket, Lens
8575096
Gasket, Flange
8575097
Mechanism Assy., GL2, Red
8654188-R
Mechanism Assy., GL2, Blue
8654188-B
Mechanism Assy., GL2, Amber
8654188-A
Figure 3.
-3-
SAFETY MESSAGE TO OPERATORS
WARNING
Peoples’ lives depend on your safe use of our
products. Listed below are some important
safety instructions and precautions you
should follow:
•
Although your warning system is operat-
ing properly, it may not be completely
effective. People may not see or heed
your warning signal. You must recognize
this fact and continue driving cautiously.
•
Also, situations may occur which ob-
struct your warning signal when natural
or man-made objects are between your
vehicle and others, such as: raising your
hood or trunk lid. If these situations
occur, be especially careful.
•
At the start of your shift, you should
ensure that the light is securely attached
and operating properly.
•
Failure to follow these safety precautions
may result in property damage, serious
injury, or death to you, to passengers, or
to others.
RETAIN AND REFER TO THIS MESSAGE
290A5112
TRIM RING
TRIM RING
SCREWS (4)
LENS
GL5 LIGHT
ASSEMBLY
MOUNTING
SCREWS(3)
HALOGEN
REFLECTOR
HALOGEN ASSEMBLY
MOUNTING BRACKET
MOUNTING
SCREWS(3)
