Model G-SND
Sounder for Use in Hazardous
Locations
Limited Warranty:
This product’s limited warranty can be found at www.fedsig.com/SSG-Warranty.
WARNING
- Failure to follow all safety precautions and instructions may result in property damage, serious injury, or
death to you or others.
MESSAGES TO INSTALLERS AND USERS
People’s lives depend on your safe installation of our products. It is
important to follow all instructions shipped with the products. This device is to be installed by a trained electrician who
is thoroughly familiar with the National Electric Code and will follow the NEC guidelines as well as local codes.
The selection of the mounting location for the device, its controls and routing of the wiring is to be accomplished
under the direction of the Facilities Engineer and the Safety Engineer. Listed below are some other important safety
instructions and precautions you should follow.
•
Read and understand instructions before installing or operating equipment.
•
Do not connect this unit to the system when power is on.
•
All effective warning speakers produce loud sounds, which may cause, in certain situations, permanent hearing
loss. You should take appropriate precautions, such as wearing hearing protection.
•
After installation, test the sound system to ensure proper operation.
•
The purchaser should make the manufacturer aware of any external effects or aggressive substances to which the
equipment may be exposed.
•
WARNING: EXPLOSION HAZARD —
Do not disconnect the equipment unless power has been switched off unless
the area is known to be non-hazardous.
•
WARNING: EXPLOSION HAZARD —
Do not remove or replace the fuse when energized.
Failure to follow all safety precautions and instructions may result in property damage, serious injury, or death.
With respect to the potential electrostatic charging hazard as mentioned in the certificate “Specific Conditions of Use,”
under normal conditions of use, these devices are for fixed installations and not generally in contact with people.
The risk of ignition is low. In addition, maintenance, cleaning, and extreme environmental factors (e.g., high velocity
dust-laden atmospheres or high-pressure steam) should be taken into account by the end user using local Explosive
Atmosphere (Ex) Electrical installation design, selection, inspection, and maintenance Codes and Standards. Cleaning of
the devices should be done only with a damp cloth.
25500187 Rev B11 0523
