16
Installation and Maintenance Instructions
Model G-SND Global Series Sounder
Figure 7 Locations of tone and volume switches
TONE
SELECTOR
SWITCH
VOLUME
CONTROL: FULL
CLOCKWISE
= MAX. VOLUME
220-240 Vac Operation (no remote switching of tones)
a.
Set the voltage selector switches to
230
and
AC
.
b.
Turn the tone selector switch to the desired tone.
c.
Connect the line (hot) power source wire to the terminal
block position marked
L1
on the PCB.
d.
Connect the neutral (common) power source wire to the
terminal block position marked
L2
on the PCB.
e.
Connect ground wire to the terminal block position
marked
EARTH
.
120 Vac operation (no remote switching of tones)
a.
Set the voltage selector switches to
120
and
AC
.
b.
Turn the tone selector switch to the desired tone.
c.
Connect the line (hot) power source wire to the terminal
block position marked
L1
on the PCB.
d.
Connect the neutral (common) power source wire to the
terminal block position marked
L2
on the PCB.
