14
Installation
Directional Speaker (Model DS100X)
Federal Signal www.fedsig.com
Table 9 Environmental and Physical
Operating temp range
-40˚F to 150˚F (-40°C to +66°C) at 20% duty cycle.
Continuous duty UL rating: -40˚F to 104˚F / (-40˚C to 40˚C).
Humidity range
0-95%, non-condensing
Size
(Height x Width x Length)
7 x 9 x 10 inches (17.8 x 22.9 x 25.4 cm)
Weight
19.2 lb (8.7 kg)
Installation
Read and adhere to all safety warnings in this manual before installing the DS100X
Speaker.
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D; Class
II, Division 2, Groups F and G; Class III or nonhazardous locations only.
ELECTROCUTION HAZARD: Electrocution or severe personal injury can occur
when making electrical connections, drilling holes, or lifting equipment. Therefore,
experienced electricians, per national and local electrical codes, acting under the
direction of the installation crew safety foreman, should perform the installation.
Determine a Suitable Location
The DS100X can be mounted on any relatively flat surface with the supplied mounting
brackets. The mounting surface must be capable of supporting the weight of the speaker.
Determine the Mounting Method
The following speaker mounting options are available for the DS100X.
Table 10 Speaker Mounting Options
Mounting Options
Description
Flat Wall Mount
A wall-mount bracket is included with the speaker.
Larger Pole Mount
(6-inch or larger
diameter poles)
Use a model I-IP100-PMW to attach the speaker to the pole. The
bracket can be secured with lag bolts or stainless steel banding.
Small Pole Mounting
(2-3/8 inch to 4-1/2 inch
diameter poles)
Use a model I-IP100-PM to attach the speaker to the pole.
U-bolts are provided for pipe mounting.
