8
Installation and Maintenance Instructions
Model 371LED-120 Rotating Light
Mounting the Light
The Model 371LED-120 light is designed for mounting on a flat
horizontal surface or on a 1-inch NPT pipe. For surface mounting on
solid substrates, the separately purchased Model 371BRCKT surface
mounting bracket can be used. If conduit side-entries are to be used,
disassemble the light as described in “Wiring the Light” on page 11
and remove one or more knockouts with a blunt tool before mounting
the light. Use a file to remove excess flash around the knockout.
INSTALLATION NOTE:
To avoid moisture buildup within the
light enclosure in highly humid areas where condensation is present
in the conduit system, duct sealant or other suitable materials are
recommended for sealing the wires/conduit entrances.
Pipe Mounting the Light
Attach the light to the 1-inch NPT pipe by threading the light
clockwise on the pipe (Figure 2). For information on making the
electrical connections, see “Wiring the Light” on page 11.
Figure 2
Mounting options
371LED-120 LIGHT
ASSEMBLY
PIPE MOUNT
SURFACE MOUNT
GASKET
MOUNTING
SURFACE
1/4" FLATWASHERS
DRILL THREE 9/32"
(7.143 mm) HOLES
1/4" SCREWS
1" NPT
PIPE
290A6859