Model 400 Series Lights
5
Safety Messages to Installers, Users, and
Maintenance Personnel
It is important to follow all instructions shipped with this product. This
device is to be installed by trained personnel who are thoroughly
familiar with the country electric codes and will follow these
guidelines as well as local codes.
The selection of mounting location for the device, its controls, and
wiring routing must be done under the direction of the facilities
engineer and the safety engineer. In addition, listed below are some
other important safety instructions and precautions you should follow:
• Read and understand all instructions before installing or
operating this equipment.
• Disconnect the light from the power supply before installing or
maintaining the light.
• After installation, test the light system to ensure that it is
operating properly.
• After testing is complete, provide a copy of this instruction sheet
to all operating personnel.
• The product nameplate, which may contain cautionary or other
information of importance to maintenance personnel, should not
be obscured in any way,
• Establish a procedure to routinely check the light system for
proper activation and operation.
Failure to follow all safety precautions and instructions may result in
property damage, serious injury, or death.
Note: A Model 350 Vibratone
®
Horn can be installed in the
lower housing of a Model 400 Series Light. It is usually more
convenient to install the audible device in the light before
attaching the light to the mounting surface. Therefore, it is
recommended that the audible device be installed (if applicable)
before proceeding.
