23. ADJUST STRAINER HEIGHT
23.1
Remove strainer and tape from strainer. If factory installed film, start peeling at one end of strainer. Peel side to side
(saw tooth pattern) to other end of strainer. Remove any remaining residue and polish by wiping with a Tub O’ Towel
®
.
23.2
Place thin end of height adjustment tool on tile and rest other end on height adjustment screw. Adjust screw for level.
Repeat for all height adjustment screws.
24. RE-INSTALL STRAINER
24.1
Place strainer over height adjustment screws.
24.2
Confirm that strainer is flush with all tiles.
24.2
Fasten with three 2-1/4” pan head screws.
Do not over-tighten screws.
25. CLEANING DRAIN
25.1 TO CLEAN DRAIN:
remove 3 screws in top of strainer. Clear any hair or other obstructions from drain.
25.1 RE-ATTACH STRAINER:
Place strainer over height adjustment screws. Replace all three screws.
Do not over-tighten.
NOTE:
Strainer attachment holes are not symmetrical. If screws do not align with holes in drain base, turn the strainer.
26. LIMITATIONS:
For applications or procedures not specifically detailed in these installation instructions, contact Noble
Company. Installation must follow TCNA recommendations and appropriate industry standards.
For any applications or procedures not covered in these instructions, contact Noble Company.
Simple Solutions... Proven Performance
Simple Solutions... Proven Performance
Simple Solutions... Proven Performance
Simple Solutions... Proven Performance
Simple Solutions... Proven Performance
Color Logo and Logo w/Slogan
White and Color Logo and Logo w/Slogan
White and Transparent Logo and Logo w/Slogan
Black Logo and Logo w/Slogan
Solid White Logo and Logo w/Slogan
7300 Enterprise Drive, Spring Lake, MI 49456 · 800-878-5788 · Fax: 231-799-8850 · www.noblecompany.com
® Registered Trademark of Tub O’ Towels, Cleveland, OH
® Registered Trademark of Noble Company ™ Trademark of Noble Company, Grand Haven, MI. © 2019 Noble Company
File #FS032019-07 | 03/19 | Supersedes FS112018-02
PMG 1065
File No. 7249