IMSS E3265
- 15 -
OPERATING INSTRUCTIONS
User Controls
Power Switch
The unit has a power switch that turns off power to the entire unit, including the
condensate evaporator and the lights. This switch is located behind a lift up panel
on the unit base.
Light Switch
The unit has a light switch that turns on and off the interior lights of unit. This
switch is located below the lift up panel on the unit base.
Electronic Control
This control is located behind a lift up panel on the unit base.
Temperature Control Knob
This controls the temperature of the display interior of case.
-OFF: Turning the control counterclockwise to the “WARM” setting is an
Off position, this position turns the refrigeration off and all indicator
lights will also be off at this setting.
-ON; The control will be on from the warmest setting at “1” and the coldest
setting at “COLD”.
Cooling light
This light will be on when control requires refrigeration to be on. The
compressor / condensing unit should be running to cool the case.
Defrost light
This light will be on when control when refrigeration is defrosting allowing
ice to melt off of evaporator coil. The number of times and length of
defrost will vary depending on case environment.
Alarm light
This light indicates that there is a problem with case or electronic control
and service should be called.
TEMPERATURE
CONTROL KNOB
POWER SWITCH
LIGHT SWITCH
COOLING
INDICATOR
DEFROST
INDICATOR
ALARM
INDICATOR
ELECTRONIC
CONTROL
