AerPOS Series AP-3617
39
Please refer to the following definition table for the information showed on the
Terminal
Status
Item
Description
MB Version
Shows the M/B version
BIOS Version
Shows the BIOS version of the M/B
IO Version
Shows the firmware version on the I/O board
Display Version
Shows the firmware version on the Display board (AerPOS
only)
Operation Service
Hours
Shows the time this system has been powered up
Stand-by Service
Hours
Shows the time this system has been connected to A/C input
Abnormal On/Off
Count
Shows the times this system has been force disconnect with
A/C input
ON/OFF Total
Shows the times this system has been power on & off
normally
System Operation
Hours
Shows the latest time the system has been operated
Display Module Plug in
Time
Shows the times the display module has been re-plugged
(AerPOS only)
Total Display Module
Standby Hours
Show the time the display module has been connected with
the system & the system has been connected to A/C input
(AerPOS only)
Total Back Light Hour
Show the time the backlight has been used (AerPOS only)
Each data would be recorded after the system is shutdown normally, for any incorrect
operation or force shutdown, only Abnormal On/Off Count & ON/OFF Total will be
recorded, the rest data will missed.
4. User could monitor the Thermal & Fan Status inside the system by clicking the icon
Thermal
.
Summary of Contents for AerPOS AP-3617
