PAGE 6 OF 9
OPERATING INSTRUCTIONS
This fireplace includes a Remote Control. See below for directions to use the Remote Control:
Buttons on the Remote Control (Figure 10) have the same functions as those on the Control Panel except Heater,
Child Lock and the transformation between the Fahrenheit and Centigrade.
CHILD LOCK button (Figure 10.E)
✦
For Child Lock, it will quickly activate and deactivate immediately after clicking.
Figure 10
A POWER
G DOWN
B FLAME
E CHILD
LOCK
F UP
C HEATER
D TIMER
Using the Control Panel: (Locate in Figure 10)
SKU#810392525
PRODUCT# 18IN-23-130
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
The Remote control comes preassembled with a working battery and a insulation plastic film. Please remove the
insulation plastic film from the battery before start using the Remote. Please replace the battery in remote control
with correct battery type showing on back of remote control when the remote control does not work.
Light bulbs may become loose during shipping. If the simulated flame effect is dim or does not operate properly
at first, please ensure that the light bulbs are properly secured in the sockets (bulbs should be finger tight – do not
over tighten).
When you first turn the heater on, it may emit a slight but harmless odor. This odor results from certain oils or
greases being heated as the appliance is used for the first time. This odor is perfectly safe and will stop shortly –
it will not reoccur after the first operation of the appliance.
NOTE:
This appliance comes equipped with an overheat protection safety device. Should the appliance begin to
overheat for any reason, it will automatically turn all functions of the appliance off. The appliance will have to be
reset prior to continuing use. To reset the overheat protection safety device, turn all controls off and unplug the
appliance. Wait 10 minutes, plug the appliance back in and turn on. If the appliance continuously overheats,
please call our customer service center.
