3 – A detailed look at your device
Your Smart Wi-Fi dry contact actuator 9327
Connection terminals:
these are the terminals to which you connect the power supply, the
load and the traditional switches. From left to right the terminal sequence is: 1) Power supply
neutral, 2-3) Power supply live, 4) Load power IN, (dry contact) 5) Load power OUT (dry
contact), 6) Traditional switch live.
Pairing button
: this button performs several functions. It is used to start the procedure for
connecting to the Wi-Fi network in your home, to start pairing with the wireless buttons and
to restore the device to its factory settings. It is also possible to directly control the actuator
by pressing this button to move the motor rst in one direction and then in the other.
LED indicator
: one indicator that provides feedback on the status of the device. In normal
operation, the LED indicates the status of the load: on when it is on and off when it is off.
When the product is started, the red LED ashes quickly, to indicate that the actuator is not
yet connected to a Wi-Fi network.
Antenna:
it is the antenna used to receive radio signals from the FEB Easy wireless buttons.
4 – Start up
To pair the 9327 actuator with a FEB Easy button, simply press the pairing button for about 3
seconds, until the LED indicator starts ashing, at this point press the button you want to
pair. Just press the button once. You will see that the LED will stop ashing, indicating that
the two have been paired. It is possible to connect more than one button to the same
actuator, up to a maximum of 10 buttons. There are no limits, instead to the number of
actuators that can be controlled by the same button, simply repeat the pairing procedure
between the button and all the actuators that you want to be controlled by the same button.
