16 INSERTING #3 AND #4 CROSSRIBS.
•
The pins on the crossrib will be inserted to delrin blocks
mounted on frame tubes. Insert crossrib through cockpit
opening at an angle then rotate. Orient the pins towards
the delrin blocks.
•
Set crossrib into place. Depress spring button with one
hand; use thumb to push rib forward. Turn bar to line up
delrin block with hole to insert pin on crossrib. Start on
one side and work your way around the rib, installing each
pin in turn.
This system is the same for both the #3 and #4 crossribs.
Feathercraft
K1 Expedition
18
Pins insert into delrin blocks
Note:
(Lever bar can be used to assist in turning tubes into alignment
by inserting pin into extension hole and rotating tube slightly.)
