Step
5
Before attaching the back
panels (F & G), move the
wardrobe close to the position
where it will be used. With
uneven floors you may need
to lean the wardrobe slightly
left or slightly right to ensure
that the doors remain square.
With the side of an assistant,
hold the wardrobe in position
and secure the wide back
panel (G) to the rear of the
wardrobe. DO NOT SECURE
TO THE CENTRE PANEL
YET. Finally, secure the
narrow back panel (F) noting
that it overlaps the wide back
panel. Tighten all twenty one
25mm CSK screws (O).
Step
6
Push fit the four shelf pins (R)
at the desired heights. Locate
the shelf (J) noting the
'Notched' corners as shown.
Screw the screws (S) into the
underside of the shelf through
the pins. Then push fit the
hanging rail (K & L) to the
hanging rail supports (N).
SHOWN WITH DOORS
REMOVED FOR CLARITY
OF ILLUSTRATION ONLY
O x 21
S x 4
R x 4