feather&black Hambledon Bed Frame Double, Quick Start Manual, Page: 6 / 8

Fitting sprung slat frame cont.
p
x8
h
x1
p
p
p
p
p
p
Open the sprung slat frame (E) and
lay face down on the working
surface. Fit the support legs (F & G)
to the positions shown, securing
with the bolts (p).
Fully tighten using allen key (h).
F
G
E
G
5
g x4
f
x4
e
x4 h x1
e
f
g
v
Finally, please check carefully
that all bolts are fully tightened
before the bed is used.
Carefully turn the frame over and position onto the
metal slat supports on each side panel. Align the frame
with the fixing holes at each end and secure using four
sets of bolts (e), spring washers (v), flat washers (g)
and sleeve-nuts (f).
When all in place tighten using allen key (h).
E
v x4
4
Hambledon Bed Frame - Assembly guide - Page 6